Products

Peel Away is a revolutionary patented concept in paint removal. The Peel Away system has been specially formulated to remove multiple layers of paint in one clean fast application.

VIEW SHOWCASE
PEEL AWAY PRODUCTS RANGE

The revolutionary paint removal system

SHOP NOW

Peel Away 1

Removes: Oil, Enamel, Lead, Asbestos

Peel Away is a revolutionary patented concept in paint removal. The Peel Away system has been specially formulated to remove multiple layers of paint in one clean fast application. The product is supplied with Peel Away paper sheets, application spatula, application guide and product datasheet.

  • Removes up to 30 layers of paint in one application
  • Provides safe lead and Asbestos paint removal
  • No toxic fumes
  • Less labour intensive
  • Preserves most substrates
  • Removes multiple coats of oil lead enamel
  • Asbestos paint polyurethane and wallpaper

Peel Away 1 can be used on:

Please familiarise yourself with the Neutraliser Data Sheet and the Neutraliser MSDS

Peel Away 8

Removes: Acrylics, Polyurethanes, Marine, Epoxy, Lead, Asbestos

One application removes multiple layers of paint – Peel Away is a revolutionary patented concept in paint removal. Our system has been specially formulated to remove multiple layers of paint in one clean fast application.

  • Removes up to 12 layers of paint in one application
  • Provides safe lead and Asbestos paint removal
  • No toxic fumes
  • Less labour intensive
  • Preserves most substrates
  • Removes multiple coats of architectural and tough industrial coatings from virtually all surfaces

Peel Away 8 can be used on:

Ultra Primer

Ultra Primer is a low viscosity nano particle primer specifically designed to penetrate and bind asbestos.

It forms a perfect surface for the Fibre Seal to adhere to. This should be applied at 8 square meters per litre.

Coating Procedure:

  1. Clean roof without using abrasion (Quaternary or Sodium Hypochlorite)
  2. Apply Ultra Primer at specified spread rate
  3. Apply waterbased Epoxy primer to similarly cleaned gutters if asbestos too
  4. Apply Fibre Seal at specified spread rate
  5. Be sure to chemically wash every year preferably using a quaternary to maintain optimal coating reflective performance

Application

Fibre Seal

Fibre Seal is a high gloss hydrophobic finish coat

It should be applied at 4 square meters per litre to give a film thickness of 200 microns wet film build. The correct film thickness is important as it will impact on the life and effectiveness of the coating. Fibre Seal is available in a variety of colours but its recommended colour is white.

White is recommended along with a high gloss as this combination reflects the most light to minimise heat build up in the asbestos sheet. Minimising the heating effect reduces the movement (expansion and contraction) of the asbestos and reduces the lapped sheets rubbing together so creating asbestos dust.

Available in White and Grey.

Coating Procedure:

  1. Clean roof without using abrasion (Quaternary or Sodium Hypochlorite)
  2. Apply Ultra Primer at specified spread rate
  3. Apply waterbased Epoxy primer to similarly cleaned gutters if asbestos too
  4. Apply Fibre Seal at specified spread rate
  5. Be sure to chemically wash every year preferably using a quaternary to maintain optimal coating reflective performance